Description
| Range of product | Preventa Safety automation |
|---|---|
| Product or component type | Preventa safety module |
| Safety module name | XPSDMB |
| Safety module application | Monitoring 2 coded magnetic switches |
| Function of module | Coded magnetic switch monitoring |
| Safety level | Can reach PL e/category 4 conforming to EN/ISO 13849-1 Can reach SILCL 3 conforming to EN/IEC 62061 |
| Safety reliability data | MTTFd = 83.1 years conforming to EN/ISO 13849-1 DC > 99 % conforming to EN/ISO 13849-1 PFHd = 3.92E-9 1/h conforming to EN/IEC 62061 |
| [Us] rated supply voltage | 24 V DC – 20…20 % |
| Output type | Relay, 2 NO circuit(s), volt-free |
| Number of additional circuits | 2 solid state outputs |
| Synchronisation time between inputs | < 0.5 s |
|---|---|
| Power consumption in W | 2.5 W |
| Input protection type | Internal, electronic |
| [Uc] control circuit voltage | 28 V DC |
| Maximum line resistance | 100 Ohm |
| Breaking capacity | 180 VA holding AC-15 C300 relay output 1800 VA inrush AC-15 C300 relay output |
| Breaking capacity | 1.5 A at 24 V (DC-13) time constant: 50 ms for relay output |
| Output thermal current | 6 A per relay for relay output |
| [Ith] conventional free air thermal current | 12 A |
| Associated fuse rating | 4 A gG for relay output conforming to EN/IEC 60947-5-1, DIN VDE 0660 part 200 6 A fast blow for relay output conforming to EN/IEC 60947-5-1, DIN VDE 0660 part 200 |
| Minimum output current | 10 mA for relay output |
| Minimum output voltage | 17 V for relay output |
| Maximum response time on input open | 20 ms |
| [Ui] rated insulation voltage | 300 V (pollution degree 2) conforming to IEC 60947-5-1 300 V (pollution degree 2) conforming to DIN VDE 0110 part 1 |
| [Uimp] rated impulse withstand voltage | 4 kV overvoltage category III conforming to IEC 60947-5-1 4 kV overvoltage category III conforming to DIN VDE 0110 part 1 |
| Local signalling | 3 LEDs |
| Connections – terminals | Captive screw clamp terminals, 1 x 0.14…1 x 2.5 mm² flexible without cable end Captive screw clamp terminals, 1 x 0.14…1 x 2.5 mm² solid without cable end Captive screw clamp terminals, 1 x 0.25…1 x 1.5 mm² flexible with cable end, with bezel Captive screw clamp terminals, 1 x 0.25…1 x 2.5 mm² flexible with cable end, without bezel Captive screw clamp terminals, 2 x 0.14…2 x 0.75 mm² flexible without cable end Captive screw clamp terminals, 2 x 0.14…2 x 0.75 mm² solid without cable end Captive screw clamp terminals, 2 x 0.25…2 x 1 mm² flexible with cable end, without bezel Captive screw clamp terminals, 2 x 0.5…2 x 1.5 mm² flexible with cable end, with double bezel |
| Current consumption | 8 mA at 28 V DC on power supply |
| Mounting support | 35 mm symmetrical DIN rail |
| Product weight | 0.25 kg |
| Standards | EN/IEC 60204-1 EN 1088/ISO 14119 EN/IEC 60947-5-1 |
|---|---|
| Product certifications | TÜV CSA UL |
| IP degree of protection | IP20 (terminals) conforming to EN/IEC 60529 IP40 (enclosure) conforming to EN/IEC 60529 |
| Ambient air temperature for operation | -10…55 °C |
| Ambient air temperature for storage | -25…85 °C |
| Unit Type of Package 1 | PCE |
|---|---|
| Number of Units in Package 1 | 1 |
| Package 1 Height | 3.0 cm |
| Package 1 Width | 11.6 cm |
| Package 1 Length | 14.4 cm |
| Package 1 Weight | 212.0 g |
| Unit Type of Package 2 | S01 |
| Number of Units in Package 2 | 15 |
| Package 2 Height | 15.0 cm |
| Package 2 Width | 15.0 cm |
| Package 2 Length | 40.0 cm |
| Package 2 Weight | 3.362 kg |
